Arduino 8×8 DOT_Matrix

Wassup Guys!!In this instructable, I’m going to show you how to Interface with LED Dot matrix using an Arduino and MAX7219 IC. This project can be used to make low-resolution images using LEDs. This project is very simple to build and it also serves as a basic to getting started with controlling a l…By: teamlighthouse Read more

Linkit One – Getting Started

The Linkit One is a development board similar to the Arduino and is developed by Seed Studio. It is programmed using the arduino IDE and has on board WiFi, Bluetooth, GPS, GPRS, SD Card Slot and 3.5mm audio output and lot more. If you are having programing experience with the Aduino IDE you would li…By: tinkerproject Read more

This Robot Turtle May Reach Mars @Raspberry_Pi #PiDay #RaspberryPi

via Quartz Media Researchers at University of Arizona have created a modular robot made of cardboard and a Raspberry Pi Zero (a simple computer) for around $70. The form and movement of this little machine is made to mimic a sea turtle, and the cardboard fins can be swapped out for more durable, 3D-printed materials depending on the environment. Biologists, mechanical engineers, and computer scientists collaborated to create this robot,... Read more

IoT Scale

In this Instructable we will make an IoT scale! You might ask: “What in the world do I need an IoT scale for?”, and that is a good question! In truth, you probably don’t need one but you also don’t need a Tesla but you’d get one if you could :PBut in all seriousness, this scale will allow you to mon…By: Jaybuilder Read more

Raspberry Pi summer projects part 1

Summer’s here, so why don’t you unplug your Pi and go outside? Use a battery pack to take your Pi with you, of course! In this issue, we celebrate the great outdoors with twelve ideas you can use to make the most of the (hopefully) good weather. You’ll see how to build a weather station, how to launch a high-altitude balloon with a Raspberry Pi tracker, and how to photograph... Read more

Touch-panel PCs run Raspbian on Raspberry Pi CM3

Comfile has launched two IP65 protected, resistive touch panel PCs with 7- and 10.2-inch 800 x 480 displays, built around the Raspberry Pi Compute Module 3. In February, Saelig Co. announced distribution of Janz Tec’s Raspberry Pi 3-based emPC-A/RPI3 industrial controller. Now, Saelig has launched North American distribution of Korea-based Comfile’s ComfilePi line of touch […] Read more